Ext2 IFS For Windows
It provides Windows NT4.0/2000/XP/2003 with full access to Linux Ext2 volumes (read access and write access). This may be useful if you have installed both Windows and Linux as a dual boot environment on your computer.
The "Ext2 Installable File System for Windows" software is freeware.
Features
Detailed list of features of the file system driver Extfs.sys:
* Supports Windows NT4.0, Windows 2000, Windows XP and Windows 2003 (x86 processors only).
* All operations you would expect: Reading and writing files, listing directories, creating, renaming, moving and deleting files or directories, querying and modifying the volume's label.
* Files larger than 4 GBytes. (Please read the FAQ section, too.)
* Paging files are supported. (A paging file is a file "pagefile.sys", which Windows swaps virtual memory to.) Users may create paging files at NT's control panel at Ext2 volumes.
* Specific functions of the I/O subsystem of NT: Byte range locks, notification of changes of directories, oplocks (which are required by the NT LAN manager for sharing files via SM.
อันนี้เป้นรูปตอนกำหนด drive ว่าจะให้ windows เห็น partition ใน linux เป็น drive อะไร สามารถแก้ไขทีหลังได้ โดยตัว config จะถูกติดตั้งอยู่ใน control panel ชื่อว่า IFS drive
download ที่นี่เลยงับ
http://www.fs-driver.org/download.html
Reply With Quote
